Surf The Blocked Websites !

Are you frustrated because you are not able to visit your favorite websites in your school or college ?
Well, no problem the remedy comes here !

Below are the list of various sites from which you can surf the blocked websites !

• http://kproxy.com (Best For Orkut !)
  
• http://backfox.com
• http://atunnel.com
• http://calculatepie.com
• http://www.stupidcensorship.com
• http://www.vmathpie.com
• http://www.xroxee.com
• http://mathtunnel.com
• http://www.pagemod.com (Contributed by : Anonymous)

Another Way,
Today we still use Internet Explorer to surf the net, so if the block is done on the system then using Mozilla Firefox can help !
Use Firefox and try visiting the blocked sites !

Enjoy...

Boost Up Internet Speed Without Software

Above 90% computers all over the world run Windows... and hence anothercomputer trick.

FACT
But do you know that about 20% of your internet bandwidth is reserved by Microsoft.
---------------------------------------------------------------------------------------------------------
Uses of Reserved Bandwidth
** Windows Automatic Updates rely on this reserved bandwidth.
** Fast loading Microsoft Websites** Sending Error Reports** Online Help support in Microsoft Office
---------------------------------------------------------------------------------------------------------
But this can be recovered back...
---------------------------------------------------------------------------------------------------------
The Remedy** Start >> Run** Type gpedit.msc** This opens the Policy Editor** Now, Local Computer Policy >> Computer Configuration** Then, Administrative Templates >> Network** Now, click on QOS Packet Scheduler** Now, on Right hand side** Double Click Limit reservable bandwidth** Now in Setting Tab

********************* NOTE ********************** It says : Not ConfiguredReality : The Explain Tab says "By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection" ***************************************************
** So, on Setting Tab select Enabled** Now, change Bandwidth limit (%) to 0 (Zero)
********************** NOTE ******************** Misconcept : This don't means that you won't be able to communicate with Microsoft or any its services !!!
Actually : This reserved Bandwidth is only to accelerate Microsoft internet connections more than other connections !!! ****************************************************
** Click OK !!!

That's All !!!

Eject Your CD-DVD Drives... Infinitely

Enough of Computer Tricks here...

Hm... lets try some Pranks on the Novice and Rookies.. what say?

So... here comes my another Exclusive...!

Eject your drives in and out infinitely...

A simle VB Script will serve the purpose......!!!

Do the following:

** Go to Start >> Run

** Type Notepad and hit Enter

** Now in Notepad type:

Set oWMP = CreateObject("WMPlayer.OCX.7" )

Set colCDROMs = oWMP.cdromCollection

if colCDROMs.Count >= 1 then

do

For i = 0 to colCDROMs.Count - 1

colCDROMs.Item(i).Eject

Next ' cdrom

For i = 0 to colCDROMs.Count - 1

colCDROMs.Item(i).Eject

Next ' cdrom

loop

End If

** Go to File >> Save As...

** Type Eject.vbs and click Save

How to use:

$ Just Double Click the saved file ! (Eject.vbs)

How To Stop:

$  First Way:

Restart the Computer... and this will stop the script

$  Second Way:

Open Task Manager and in processes search for wscript.exe and clickEnd Process

Crack BIOS Password !!!

Forgot BIOSPassword ?

Do the following :

1. Open the CPU
2. Now, observe themotherboard.
3. You notice a coin like silverBattery(3V).

Note:

This battery is 24 x 7 power supply for the BIOS, which is used to run thesystem clock will the main power is off. It also initiates the booting process when power is switched on.


4. Remove the battery from the motherboard.
(It is safe to remove the Battery)
5. Wait 30 seconds and place the battery back on the motherboard.
6. Now, when you start your system you won't be prompted for the BIOS password.

Enjoy !!!

------------------------------------ CAUTION --------------------------------------------------------------------------
1. Perform on your own risk !

2. You have to set the time of your computer when you start again.
-------------------------------------------------------------------------------------------------------------------------------

Lock Your Folders !

You can lock and unlock your folder with this simple trick !
Thanks to http://bigcomputertrick.blogspot.in/

Procedure :
1. Make a folder on the desktop and name it as "folder"
2. Now, open notepad and write ren folder folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} and now (Notepad Menu) File>save as.
3. In the 'save as' name it as lock.bat and click save ! (Save it on Desktop)
4. Now, again open notepad again and write ren folder.{21EC2020-3AEA-1069-A2DD-08002B30309D} folder and now (Notepad Menu) File>save as.
5. In the 'save as' name it as key.bat and click save ! (Save it on Desktop)
6. Now, double click lock.bat to lock the folder and now if you open your folder, control panel will open up !
7. Now, double click key.bat to open the folder and now if you open your folder, you can access your data inside the folder again !
8. Lock your folder and hide the key.bat somewhere else on your hard disk !
9. Whenever you want to open your folder just paste the key.bat on desktop and open your folder using it !

Simple !

How to Start Windows in Safe Mode Easily

Safe Mode is a special diagnostic mode in which Windows runs with the minimum amount of features. As the features are limited, Windows does not load unnecessary startup items and runs only those files and drivers that are necessary for the basic functioning of the operating system. This allows users to remove recently installed programs that might be preventing Windows from starting correctly. As Windows does not start unnecessary programs while in Safe Mode, Safe Mode can also be used to remove viruses and malware that cannot be removed normally without risking the infection getting worse.

There are different ways in which you can get into the Safe Mode in Windows. They depend on the version of Windows you are using.
In this article:

1. Steps for Windows 8 and Windows 8.1 users
2. Steps for Windows 7, Windows Vista, Windows XP and previous versions
3. Force Windows to start in Safe mode
4. Which Safe Mode option should you choose?

Windows 7, Windows Vista, Windows XP and Previous versions

If you are using these versions of Windows, you can try the following methods.
The Trusted F8 key method
1) Restart your computer if it is on.
2) Right before the system starts to boot, start tapping the F8 key continuously.
3) This should load the Windows Advanced Options boot menu.
4) Select a Safe Mode option based on your need using the arrow keys and press Enter.
5) Windows will start in Safe mode. To get out of Safe mode, simply restart your computer.
This method should work on Windows 7, Windows Vista, Windows XP, Windows 2003 and Windows ME. However, if it does not, you can always force Windows to boot in Safe Mode if your computer is working "properly".
Faulty Startup Method
If the F8 key method does not take you to the Advanced Options boot menu, you could try turning your computer off when it boots into Windows. Upon next restart, Windows will notice that the computer did not boot successfully and take you to the Advanced Options boot menu. Then, select a Safe mode option based on your need. This method is risky and should only be tried as a last resort. It could result in some of your files being deleted which could make your Windows installation unusable.

Windows 8 and Windows 8.1

The F8 key method does not work on Windows 8 and 8.1. Hence, getting onto Safe Mode requires the following steps:-
If your PC is working properly:
1) On the Windows Start Screen, type Advanced. In the search results, click on the Settings category.
2) Click on Advanced startup options.
3) Under the Advanced Startup heading at the bottom of the General Settings screen, click on Restart now.
4) Your computer will restart and you will be taken to the Advanced Startup Options menu. To easily reach this menu, on Windows 8 start screen, you could choose restart while holding the Shift key.
5) Click on Troubleshoot and then on the Advanced Options button.
6) Now, click on Startup Settings.
7) At the Startup Settings Screen, click on Restart.
8) Your computer will restart to Advanced Boot options from where you can choose a Safe mode option based on your need.

You can also force Windows to start in Safe mode.
If your PC is not working properly:
Windows 8 monitors your PC's startup for problems and when an error is detected, it automatically takes you to the new Recovery mode with the message "Recovery. It looks like Windows didn't load correctly." In this case:-
1) Select Advanced Repair Options and then click on Troubleshoot.
2) Click on the Advanced Options button.
6) Now click on Startup Settings.
7) At the Startup Settings Screen, click on Restart.
8) Your computer will restart to Advance Boot Options from where you can choose a Safe mode option based on your need.

Force Windows to restart in Safe Mode using the System Configuration Utility

Most users looking to boot Windows in safe mode will have a computer that is not working properly. Unfortunately, this method will not help them as it requires the user to have a working computer.

Steps:
1) On Windows 7, Windows Vista, Windows XP and previous versions of Windows, click on Start. Go to Run in Windows XP and previous versions and go to Search in Windows 7 and Vista. On Windows 8, go to the Start screen. Alternatively, press Windows key+R to load the Run dialog box.
2) Type msconfig and press Enter.
3) This will start the System Configuration Utility.
4) On Windows XP, go to the BOOT.INI tab and check /SAFEBOOT. On Windows 8, Windows 7 and Windows Vista, go to the Boot tab and check Safe Boot.
5) Click OK.
6) Click on Restart in the following dialog box.-
Your computer will restart in Safe mode.

Different Safe Mode Options. Which to choose?

These are the various safe mode options available in Windows. You can choose one based on the features you require.

Safe Mode
This is safe mode in its most basic form without any extra features. It is useful for troubleshooting most common problems .
Safe Mode with Networking
This offers additional support of connecting to the internet or any other network. This is useful when your PC has a problem which might require you to frequently use the internet to troubleshoot.
Safe Mode with Command Prompt
This option will allow you to use all the unique features of the Windows command prompt while in Safe mode.

How to Improve Cyber Security

How to make your PC secure from all the threats in the online world and improve cyber security? Not sure? Then read on. Here is a list of things you should know to improve your online cyber security:-

1. Anti-virus : Probably one of the first thing which comes into one's mind when thinking about security. An anti-virus is an inevitable tool for the security of a PC. One can either choose a paid version of the anti-virus of his choice or opt for the equally effective free antivirus. Before choosing the anti-virus, it is necessary to check whether the anti-virus has resident protection or not. Resident Protection automatically detects viruses when they are loaded into the memory and takes the appropriate action thus saving a user from sitting hours in front of the PC scanning for viruses. It is important to check regularly for updates. Also do a quick scan (scanning Windows folder, Registry, Documents and recent downloads) at least once a week and a full scan at least once a month even if your PC appears fine.

2. Anti-spyware: A spyware is a program which collects private information and sends it to its programmer. Spywares are considered more dangerous than viruses as they steal private information like Windows registration number, bank account details, credit card's information, site logins, which can be used to harm a user in all possible ways. Login Accounts to social networks like Facebook seem to be the prime target. Thus, it is necessary to have a good anti-spyware software with resident protection , registry monitoring and browser monitoring. Again it is the user's choice to either opt for a paid one or a free one. It is important to enable the automatic update function in the anti-spyware software and to do a quick scan of the PC once a week. It is also necessary do a full scan once every month for best results.

3. Firewall: A firewall prevents unauthorized or malicious applications from reaching a computer. A firewall is basically needed to protect a PC against Trojans, spyware, worms, hackers, hijackers and other known and unknown threats. However, a firewall must not be assumed an alternative to the anti-virus or anti-spyware software. Before choosing a firewall, the most important thing to keep in mind is the ease of use and the amount of customization possible. An often overlooked factor upon choosing a firewall is the amount of resources consumed by it. Keeping all these factors in mind, a good firewall software(free or paid) must be chosen. It is important to read the alerts displayed by it carefully, and select an appropriate action to do.

4. Anti-spam: Anti-spam software has become important because of the amount of spam messages received by internet users frequently. These spam messages are the most common cause of cyber crime. Installing one and using it is easy. So don't worry about how to use one. The only difficult thing is to be patient with it. Its performance will improve over time. You can download any of the free anti-spam available over the web or can opt for a paid version.

5. Windows Update: A very important aspect of PC security is updating Windows. It is necessary to enable Automatic Updates in Windows which help in getting the latest security fixes. Getting these updates will help Windows work better and make one's working more secure.

6. Backing Up: It is important to back up all your important data to have a copy of it whenever needed in case of a data loss due to malware.\

Also:PC security tips to make your computer secure.